Keypads for the MOVITRAC® B and MOVIDRIVE® B inverters make your job easier, whether you are working on startup, diagnostics or status displays. Your quick, easy and convenient on-site alternative to the PC!
Being able send commands to the relevant drive components directly at the machine or system, with no need to start up a notepad or to access the central controller, must be a logical step forward?
It certainly is for SEW-EURODRIVE. This is because our drive electronics have corresponding keypads which, as an option, can be easily plugged into the MOVITRAC® B or MOVIDRIVE® inverters. This adds real flexibility when using the operator terminal. The basic FBG11B keypad complies with IP degree of protection IP20 and the DBG11B keypad also complies with IP40.
And if there are reasons for mounting the keypads close to the motor, e.g. in the control cabinet door, then implementation is also straightforward. We also offer relevant housing in IP degree of protection IP65.
These keypads are indispensable for quick, simple and direct operation and monitoring of process sequences on-site. See for yourself how quickly and conveniently you can view your process values and status displays; set, change or transfer parameters; secure data and rectify error messages.
Get in touch with us.
- Our experts know your industry and its requirements.
- Our global network ensures we are there wherever and whenever you need us.
- We have the expertise and the tools to provide optimum support and advice.
Your benefits
-
No PC needed -
use our inverters while working directly at your machine or system. -
Simple startup
thanks to process values and status displays, as well as simple parameter settings. -
Fast diagnostic process
with fast information retrieval from the fault memory. And faults are also quickly rectified via error reset.
Basic operator terminal FBG11B
for MOVITRAC® B
- functions
- Display process values and status
- Error memory and error reset queries
- Displaying and setting parameters
- Back up and transfer of parameter sets
- Simple startup menu for motors from SEW-EURODRIVE and third-party motors
- Manual control of MOVITRAC®B
- Features
- 5-digit, 7-segment display / 6 buttons / 8 icons / setpoint control module
- Selection of short or long menu
- Can be plugged onto the inverter (during operation)
- Enclosure IP20 (EN 60529)
- LED display when IPOS® program is started
